Cart 0

SpeedSix - ProLube | 125ml

Regular price £10.95

Who is it for?

SpeedSix is for everyone who loves sailing and water-sports. If you have ever purchased an aerosol of lubricant from a chandler then SpeedSix is for you.
Whether you're at the top of your game racing a foiling cat or cruising in a bilge keel weekender, SpeedSix is designed to protect your pride and joy as much as it is about performance, and after all who does not want the sheets, guys and halyards to run a little easier or the sails to run easy in the track. It is even perfect for the old wooden blocks found on the 'Old Gaffers' and Norfolk Broads yachts. No Matter what level or what boat you are sailing it is about being your best and your equipment delivering the best.

Application of SpeedSix

Tracks, cars and sheeves;
Apply by spraying on to a soft cloth and polishing the entire track, this will give an even veneer of SpeedSix to all surfaces. For blocks and rollers spray directly on to the bearing surfaces and ball races, again polish the outer surfaces to remove any excess lubricant. Allow to fully dry and if required polish the surfaces once again to leave a lustre.
Carbon fibre, Metal and composite surfaces.
Spray directly on to the surface or on to a clean dry cloth and polish Speed six in to the surface. Allow to dry for 2-3 minutes and polish with a clean dry cloth. As with any wax, Speedsix requires the wax surface to be polished to a shine.
Hull application
Clean the hull surface by cutting back  with a suitable grit compound such as Farecla G3. Apply Speedsix directly on to the surface evenly to a 1m square at a time. immediately polish the surface with a cloth working the Speedsix liquid in to the surface. Continue until the entire hull has been covered. With a fresh clean dry soft cloth polish the surface until the desired shine is achieved. A second coat of Speedsix can be applied after a further 72 hours.
How it works
Speedsix bonds to the surface it is applied to. This process takes between 4 hours and 24 hours to fully complete and is dependant on the material it is applied to and the ambient temperature. Ideally apply in temperatures above 10 degrees in a dry environment.
SpeedSix's chemistry makes it hydrophobic and resistant to acids and salts found in salt water and the marine environment, it therefore protects all the surfaces it is applied to as well as lubricating them.
It is designed to be a very thin lubricant which will penetrate and wick its way in to the ball race of all blocks, pulleys and sheaves.
Kinder to the environment
SpeedSix has a lanolin base - 100% environmentally friendly, biodegradable, non-carcinogenic and most importantly certified safe to be used within the food chain. Therefore once applied and dried safe for your boat, safe for you and safe for the environment.
Lanolin is a natural product (wool wax) from sheep it is the evolution by nature which has given this incredible capability of providing an environmental barrier which is not only weatherproof but extremely low in friction. 

Share this Product

More from this collection